Water damage in Awendaw properties rarely stays where it originated. It migrates through wall framing, saturates subfloor assemblies, moves along structural members, and collects in ceiling cavities — creating hidden moisture pockets that show no visible surface signs but create ideal conditions for mold growth within 48-72 hours. COS Water Damage Restoration's Awendaw inspection team uses FLIR thermal imaging, calibrated pin-type and non-penetrating moisture meters, and systematic structural assessment protocols to map water migration through your property completely — before remediation begins or before you close on a purchase.
A credible water damage inspection in Awendaw does more than identify where the water is visible. It traces where the water went — through structural assemblies, behind finishes, and into below-grade spaces — and produces a written, defensible assessment you can act on or present to an insurance carrier, a buyer, or a remediation contractor.
FLIR infrared thermal cameras detect temperature differentials in structural surfaces — a wet wall cavity cools differently than a dry one during evaporation, making moisture migration visible as a thermal signature even behind intact drywall. Our Awendaw inspection team uses thermal imaging as the primary tool for tracing water migration paths through wall systems, subfloor assemblies, and ceiling cavities, identifying affected areas before a single pin is driven into a wall.
Qualitative assessment says "it looks wet." Quantified readings say "this framing is at 28% moisture content and the dry standard is 10%."
A verbal assessment is an opinion. A written report with instrument readings is documentation.
Both use cases are available in Awendaw — contact us with your specific situation and our inspector will scope the right assessment.
COS Water Damage Restoration's Awendaw inspection team covers every structural assembly type, every common water migration path, and every inspection use case encountered in residential and commercial water damage situations in SC.
When a water damage event has just occurred in a Awendaw property — or happened within the last several days — our inspection maps the full extent of saturation while the moisture is still detectable by thermal imaging and direct meter readings. This inspection is the foundation of the remediation scope and the insurance claim documentation. Without it, remediation crews are guessing at what to dry, and insurance carriers are estimating on incomplete data. Our Awendaw active event inspection captures the full saturation picture at the moment of peak detectable moisture — when the readings tell the most accurate story of what happened.
Real estate transactions in Awendaw frequently involve properties with prior water events — disclosed and undisclosed. Our pre-purchase inspection uses thermal imaging and moisture meters to identify active moisture in structural assemblies, staining patterns consistent with prior water intrusion, and the condition of previous remediation. For Awendaw buyers, this inspection provides either confidence that a disclosed water event was properly handled, or documentation that it was not — giving the buyer negotiating leverage and a clear picture of what additional remediation cost, if any, is warranted.
Post-remediation verification is an independent assessment — not a rubber stamp.
Properties in Awendaw that had a water event 48 hours or more before inspection — or where a slow leak went undetected for an extended period — may present mold risk alongside ongoing moisture concerns. Our mold risk assessment inspection identifies the structural conditions that support mold growth: elevated moisture content in organic materials, elevated ambient relative humidity, and the presence of visible mold growth on surface or semi-concealed areas. This assessment determines whether a standard drying-focused remediation is appropriate or whether S520-standard mold remediation protocols need to be incorporated into the project scope.
Below-grade spaces in Awendaw properties — crawlspaces, basement areas, and below-slab conditions — are among the most common locations for chronic moisture problems to go undetected. Our Awendaw below-grade inspection covers crawlspace wood framing moisture content readings at joists and beams, vapor barrier condition and coverage, condensation evidence on structural surfaces, and visual assessment for wood rot, fungal growth, and pest damage associated with chronic moisture. Written findings document the below-grade condition for remediation scoping or real estate disclosure.
Our Awendaw inspection reports are formatted to the documentation standards that insurance carriers use to evaluate water damage claims in SC.


Same-day scheduling available for active water events. Pre-purchase inspections booked on your transaction timeline.
Our Awendaw inspector arrives with FLIR thermal camera, calibrated pin-type and non-penetrating moisture meters, and inspection documentation tools. The inspection begins with a thermal pass of all suspected affected areas, followed by direct meter readings at all thermally identified locations. Each reading is recorded at a labeled sensor point location on the floor plan.
You understand what was found before you receive the written report.
The written inspection report — thermal images with annotations, sensor point readings mapped to a floor plan, water category determination, and recommended scope — is delivered within 24-48 hours of the on-site session, formatted for insurance, remediation, or real estate use as appropriate to your situation. We're available to answer adjuster or real estate agent questions about the findings.



"The thermal imaging session was what sold me on how a proper Awendaw water damage inspection should work. Our inspector traced water migration I never could have guessed at — the event in the utility room had spread moisture into the adjacent storage room wall framing more than twelve feet away. The written report documented all of it and our remediation contractor used it directly to scope the drying project."
"I had noticed a musty smell in a room of my Awendaw home for months before calling COS Water Damage Restoration. Their inspection found active moisture in the subfloor assembly under an area rug — a slow pipe drip that had been going on long enough to saturate the subfloor significantly without any visible surface evidence. The written report documented the moisture readings, the thermal images showing the extent of the affected area, and the recommended scope. I would never have found this without the thermal camera."
"We manage a portfolio of Awendaw rental properties and COS Water Damage Restoration's inspection service is what we use every time a water event is reported, prior to any remediation starting. The inspection report maps the damage completely — it's what we give our remediation contractor as the scope of work and what we give our insurer as the damage documentation. Having a consistent, instrument-backed inspection process has eliminated the disputes we used to have about whether remediation was complete or whether the damage scope matched what we claimed."
COS Water Damage Restoration's certified inspection team serves Awendaw and surrounding communities throughout SC. Call +1-844-499-0972 to schedule your Awendaw inspection.
Visible water damage is easy to find. The moisture behind your walls and under your floors is what causes the mold problem three months later. Call +1-844-499-0972 and our Awendaw inspection team brings the instruments to find all of it.
📞 Call +1-844-499-0972 — Schedule Awendaw InspectionIICRC Certified · FLIR Thermal Imaging · Written Reports · Awendaw, SC